Surface Preparation :

The substrate must be sufficiently dry, level, stable, frost-protected, clean and without traces of oil, grease, tar, honeycombing, cracks, dust, dirt, residue mortar or other potential contaminants. Edges should be broken and inside joints rounded out with suitable material

Application :

IZOLASTIK BITUM ASTAR after diluted with 20% water and mix thoroughly can be applied with a bush or roll. Should not be applied to the wet and pooled surfaces.

Dosage :

As a primer  0,4 kg/m²

Storage :

Store in a cool and dry conditions (+5°C to +35°C). In closed original unopened packs, the material can be stored for approximately 1 year protected from direct sunlight and frost

Package :

17 lt pails