Surface Preparation :

The surface must be cleaned and freed from dust. There should not be any   friable and mobile particle on the surface. Finally the  surface must be moisturized before the application.

Application :

For 20 kg bag should be mix with approximately 4-5.5 liters of water.  But it is suggested that do not mix the entire bag in one go because the time of hardening of REM-100 is short if it is compared with the classical grouts. Only needed amount of powder should be mixed with sufficient water.

Pour the correct amount of water in a vessel. Add powder  while mixing the water. For small amounts, the sufficient water can be added after the powder was poured in to the vessel.

The consistency can be easily adjustable by the water quantity. The application temperature effects the hardening time. Hardening time will be shortening if the temperature is higher than application temperature and vice versa.  Do not exposethe material direct and strong sunshine.

Dosage :

1,5 - 2,0 kg/m²

Storage :

It can be used 6 months from the date of production if the system stored properly in unopened original sealed packaging and should be protected from moisture.

Package :

25 kg of bag.