Surface Preparation :

Substrates should be clean, damp, smooth and sound. The major deformations and holes on substrate should be repaired.

Application :

For each coat, 20 kg powder component should be slowly added to 10 kg liquid component and mixed with a low-speed mixer until it reaches a homogeneous state.After the mixture is aged for 2 minutes, it should be mixed again before application should be applied to the entire substrate with a brush or trowel in min 2 coats.

Application of each coat should be vertically performed to the previous coat.  It should be waited for min 6 hours between the coats. Fabric reinforcement can be used between the layers optionally. The use of fabric reinforcement is suggested since fabric reinforcement increases the resistance of the hardened system against impact forces.

Dosage :

1,5 kg/m2 per layer with minimum 2 layers

Storage :

1 year from the production date in dry and moisture free ambient. Package should be kept tightly closed when not in use.

The liquid component should be protected against frost.

Package :

Component  A (liquid):  6kg of pail

Component B (powder): 19kg of bag.