Surface Preparation :

The surface must be cleaned and freed from dust. There should not be any   friable and mobile particle on the surface. Finally the  surface must be moisturized before the application.

Application :

Average 6 lt water and 25 kg REM 300 Y should be mixed with low-speed mixer preferably or trowel until no more lump will remain. After aging REM 300 Y for 5 minutes, it should be mixed for further 1-2 minutes before application. The mortar  should be applied on the substrate and its thickness should be  adjusted with steel notched trowel. Second layer should be applied after plaster mesh buried inside of the fist coating for extra strength.

Dosage :

5 kg/m²

Storage :

It can be used 6 months from the date of production if the system stored properly in unopened original sealed packaging and should be protected from moisture  and frost.

Package :

25 kg of Kraft bag.