Surface Preparation :

The substrate of new concrete of application should not be finished with steel trowel or tray finish and should have been leveled with wooden trowel. You should wait until bearing concrete becomes fit for bearing concrete. The proper time is that concrete should have been hardened as 0,5-1,5 cm foot print will seen on the concrete.

Application :

REM 500 is distributed on the entire substrate via scattering, homogenous distribution should be ensured as much as possible for the first 3 kg of REM 500 This process can be done manually or with a special scattering equipment. You should wait until the material scattered will change its color by absorbing the water of concrete.

REM 500 changing its color scattering homogenously and absorbing water is compressed with tray finish and integrated with concrete. Then 2kg REM 500 scattered on top of this layer  finishing starts and this process continues until the desired brightness is achieved using rotary  trowel.

Dosage :

~5,0 kg/m²

Storage :

It can be used 6 months from the date of production if the system stored properly in unopened original sealed packaging and should be protected from moisture and frost .

Package :

25 kg Kraft bag.