Surface Preparation :

The surface must be cleaned and freed from dust. There should not be any   friable and mobile particle on the surface. Finally the surface must be moisturized before the application.

Application :

25 kg bag REM 450 should be put in the container with 3,75- 4,25 lt clean water, slowly and should be mixed with low-speed mixer about 3-4 minutes until homogeneous state is achieved.

Avoid adding water to the mortar after it begins to harden. The mixture should be aged for 2 minutes. REM 450 in fluid form should be poured from one side of mold in case of mold applications  which is prepared before without break, so air compression in the mixture should be prevented.

Dosage :

Varies depends on the application

Storage :

It can be used 6 months from the date of production if the system stored properly in unopened original sealed packaging and should be protected from moisture and frost.

Package :

25 kg of Kraft bag.