Surface Preparation :

The surface must be cleaned and freed from dust. There should not be any   friable and mobile particle on the surface. Finally the surface must be moisturized before the application.

Application :

The concrete substrates should be pre-soaked with clean water  continuously for 2 - 6 hours to ensure a saturated surface dry condition throughout the operation. Water / REM 400 rate should not exceed 1,5/5 inside of this rate mix REM 400 with water until reached desired consistency. Use the mixture immediately,  after pouring be sure that there are no  entrapped air.

Dosage :

Varies depends on the application

Storage :

It can be used 6 months from the date of production if the system stored properly in unopened original sealed packaging and should be protected from moisture.

Package :

25 kg of bag.